Initiale Konfiguration

ESPHome-Configs für Growatt MIC 1500 TL-X und SPH 5000 TL3-BH-UP
mit Modbus-RTU Integration über den Growatt SuniStick.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>

Growatt MIC 1500 TL-X/Growatt MIC 1500 TL-X.yaml

@@ -0,0 +1,183 @@
+esphome:
+  name: growatt-mic-1500
+  friendly_name: Growatt MIC 1500 TL-X
+
+esp8266:
+  board: esp07s
+
+logger:
+
+api:
+  encryption:
+    key: "HIER_API_KEY_EINTRAGEN"  # 32-Byte Base64-Key, wird in der ESPHome-UI automatisch generiert
+
+ota:
+  - platform: esphome
+    password: "HIER_OTA_PASSWORT_EINTRAGEN"  # Beliebiges Passwort für Over-the-Air Updates
+
+wifi:
+  ssid: "HIER_WLAN_NAME_EINTRAGEN"      # Name deines WLANs (SSID)
+  password: "HIER_WLAN_PASSWORT_EINTRAGEN"  # Passwort deines WLANs
+  ap:
+    ssid: "Growatt MIC 1500 TL-X Fallback Hotspot"
+    password: "HIER_HOTSPOT_PASSWORT_EINTRAGEN"  # Passwort für den Notfall-Hotspot (min. 8 Zeichen)
+
+captive_portal:
+
+time:
+  - platform: homeassistant
+    id: homeassistant_time
+
+output:
+# Blue Led
+  - id: light_bl
+    platform: gpio
+    pin: 16
+# Green Led
+  - id: light_gr
+    platform: gpio
+    pin: 0
+# Red Led
+  - id: light_rd
+    platform: gpio
+    pin: 2
+
+uart:
+  id: mod_bus
+  tx_pin: 1
+  rx_pin: 3
+  baud_rate: 115200
+  
+modbus:
+  id: modbus1
+  uart_id: mod_bus
+  
+modbus_controller:
+  - id: growatt
+# the Modbus device addr
+    address: 0x1
+    modbus_id: modbus1
+    setup_priority: -10  
+
+
+sensor:
+  - platform: modbus_controller
+    name: "DcPower"
+    address: 5
+    register_type: "read"
+    unit_of_measurement: W
+    device_class: power
+    icon: mdi:flash
+    value_type: U_DWORD
+    accuracy_decimals: 1
+    filters:
+    - multiply: 0.1
+        
+  - platform: modbus_controller
+    name: "DcVoltage"
+    address: 3
+    register_type: "read"
+    unit_of_measurement: V
+    device_class: voltage
+    icon: mdi:flash
+    value_type: U_WORD
+    accuracy_decimals: 1
+    filters:
+    - multiply: 0.1
+    
+  - platform: modbus_controller
+    name: "DcInputCurrent"
+    address: 4
+    register_type: "read"
+    unit_of_measurement: A
+    device_class: current
+    icon: mdi:flash
+    value_type: U_WORD
+    accuracy_decimals: 1
+    filters:
+    - multiply: 0.1
+    
+  - platform: modbus_controller
+    name: "AcFrequency"
+    address: 37
+    register_type: "read"
+    unit_of_measurement: Hz
+    icon: mdi:flash
+    value_type: U_WORD
+    accuracy_decimals: 1
+    filters:
+    - multiply: 0.01
+  
+  - platform: modbus_controller
+    name: "AcVoltage"
+    address: 38
+    register_type: "read"
+    unit_of_measurement: V
+    device_class: voltage
+    icon: mdi:flash
+    value_type: U_WORD
+    accuracy_decimals: 1
+    filters:
+    - multiply: 0.1
+  
+  - platform: modbus_controller
+    name: "AcOutputCurrent"
+    address: 39
+    register_type: "read"
+    unit_of_measurement: A
+    device_class: current
+    icon: mdi:flash
+    value_type: U_WORD
+    accuracy_decimals: 1
+    filters:
+    - multiply: 0.1
+    
+  - platform: modbus_controller
+    name: "AcPower"
+    address: 40
+    register_type: "read"
+    unit_of_measurement: W
+    device_class: power
+    icon: mdi:flash
+    value_type: U_DWORD
+    accuracy_decimals: 1
+    filters:
+    - multiply: 0.1
+    
+  - platform: modbus_controller
+    name: "EnergyToday"
+    address: 53
+    register_type: "read"
+    unit_of_measurement: kWh
+    device_class: energy
+    icon: mdi:flash
+    value_type: U_DWORD
+    accuracy_decimals: 1
+    filters:
+    - multiply: 0.1
+    
+  - platform: modbus_controller
+    name: "EnergyTotal"
+    address: 55
+    register_type: "read"
+    unit_of_measurement: kWh
+    state_class: total_increasing
+    device_class: energy
+    icon: mdi:flash
+    value_type: U_DWORD
+    accuracy_decimals: 1
+    filters:
+    - multiply: 0.1
+
+    
+  - platform: modbus_controller
+    name: "Temperature"
+    address: 93
+    register_type: "read"
+    unit_of_measurement: C
+    device_class: temperature
+    icon: mdi:thermometer
+    value_type: U_WORD
+    accuracy_decimals: 1
+    filters:
+    - multiply: 0.1