retr0
852ec90e6b
- STM32F103RBT6 Firmware für Growatt ShineLAN-X - Bitbang-SPI (EthernetENC) auf Port C (PC6/PC7/PC8/PC9) - UART-Debug auf USART1 (PA9/PA10), Modbus temporär deaktiviert - SO-Aktivitätstest und ESTAT-Register-Scan bestätigen: ENC28J60 läuft (SO aktiv), SI/MOSI-Verbindung unterbrochen - Nächster Schritt: Pin 5 ENC28J60 nachlöten oder Bodge-Draht Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
49 lines
1.3 KiB
C
49 lines
1.3 KiB
C
#ifndef UIPETHERNET_CONF_H
|
|
#define UIPETHERNET_CONF_H
|
|
|
|
// https://github.com/jandrassy/EthernetENC/wiki/Settings
|
|
|
|
/* for TCP */
|
|
#ifndef UIP_SOCKET_NUMPACKETS
|
|
#define UIP_SOCKET_NUMPACKETS 3
|
|
#endif
|
|
#ifndef UIP_CONF_MAX_CONNECTIONS
|
|
#define UIP_CONF_MAX_CONNECTIONS 4
|
|
#endif
|
|
|
|
/* for UDP
|
|
* set UIP_CONF_UDP to 0 to disable UDP (saves aprox. 4kB flash) */
|
|
#ifndef UIP_CONF_UDP
|
|
#define UIP_CONF_UDP 1
|
|
#endif
|
|
#ifndef UIP_CONF_UDP_CONNS
|
|
#define UIP_CONF_UDP_CONNS 2
|
|
#endif
|
|
|
|
/**
|
|
* size of received UDP messages backlog. it must be at least 1
|
|
*/
|
|
#ifndef UIP_UDP_BACKLOG
|
|
#define UIP_UDP_BACKLOG 2
|
|
#endif
|
|
|
|
/* timeout in ms for attempts to get a free memory block to write
|
|
* before returning number of bytes sent so far
|
|
* set to 0 to block until connection is closed by timeout */
|
|
#ifndef UIP_WRITE_TIMEOUT
|
|
#define UIP_WRITE_TIMEOUT 2000
|
|
#endif
|
|
|
|
/* timeout after which UIPClient::connect gives up. The timeout is specified in seconds.
|
|
* if set to a number <= 0 connect will timeout when uIP does (which might be longer than you expect...) */
|
|
#ifndef UIP_CONNECT_TIMEOUT
|
|
#define UIP_CONNECT_TIMEOUT 5
|
|
#endif
|
|
|
|
/* periodic timer for uip (in ms) */
|
|
#ifndef UIP_PERIODIC_TIMER
|
|
#define UIP_PERIODIC_TIMER 100
|
|
#endif
|
|
|
|
#endif
|